Group central station communication settings

‌Group central station communication settings

You can enable or disable the communication of various event types to one or more central stations.

The following list defines the information each event type communicates to the central station when you select the relevant check box on the CS COMMUNICATING tab:

Alarm

For security or safety breaches, the platform sends an alarm notification to the central station. The security and safety breaches are burglary, fire, emergency, and panic alarms.

Alert

For an event that requires attention, the platform sends an alert notification to the central station. The alert events are low battery, AC failure, gas, and flood events.

Restore

If a detector reading returns to its original state, the platform sends a restore alert to the central station.

Security open/close

If the state of the panel changes, the central station updates. The panel states are away, home, and disarm.

Note: You can configure the panel to send detector open and close notifications even when the panel is in a disarm state.

Camera being viewed

If a PIR CAM requests video on demand, the platform sends a notification to the central station.

Camera trouble

Currently not supported.

Home devices (HD) on/off

If a PGM turns on or off, the platform sends a notification to the central station.

Home devices (HD) trouble

Currently not supported.

Online

When the panel goes online, the platform sends a notification to the central station.

Offline

When the panel goes offline, the platform sends a notification to the central station.

Notice

If there is an information message, such as a device bypass or panel auto test, the platform sends a notification to the central station.

Routine remote inspection (RRI)

After a routine remote inspection, the platform sends a success or failure notification to the central station.

Open/close

If the state of a detector changes, the platform sends a notification to the central station.

Illumination

If there is an alert related to light, the platform sends a notification to the central station.

Temperature

If there is a temperature alert, the platform sends a notification to the central station.