< Previous | Contents | Next >

‌Associating a PIR camera with a sensor‌

Note: You can associate a PIR camera with sensors with a PSP 1.30 panel only.

1. To open a panel in the Equipment hub, on the Panels page, in the PANEL column, click the panel name.

2. On the DEVICES tab, click a PIR camera device.

3. In the examination pane, click CONFIGURATION. If the configuration parameters are not up to date, click REFRESH.

4. Scroll down to Camera X Zone Assign. The X represents the PIR camera device zone number.

5. In a Zone Cam Trig field, enter the zone number of the sensor that you want to trigger the PIR camera to record video foot- age.

6. Optional: Repeat Step 5 to associate the PIR camera with up to seven additional trigger sensor devices.

‌7. To save the configuration in the panel, in the notification panel below the Devices tabs, click UPLOAD.

< Previous | Contents | Next >